HP 2640

I want to introduct something about universal joint,uhalf-pixel positioning effectively doubled the horizontal
joint,cross axle,auto joint. universal joint,u joint,crossresolution to 14 dots , giving the characters very
axle,auto joint Place of Origin: China Zhejiang Modelsmooth outlines. (The initial sales literature referred to it
Number: different kinds Company Info Terms ofas using a 7x9 matrix generated in a 9x15 dot
Payment: L/C,T/T,T/T ,L/C Minimum Order: 1000pcscharacter cell).
Packaging: Carton packing Delivery Lead Time: 30All of this resulted in an extremely easy to read display
days Replacement parts for kinds of U Joints Fit to:with the dot-matrix nature, and the scan lines, almost
Nissan ,Toyoto , Honda, Mazda, ISUZU, Mitsubishi,invisible.
DAIHATSU,Hyundai , Kia,Daewoo ,Jeep, Ford ,The keyboard had flat tops, similar to the HP 9800
Chevrolet, Pontiac, Buick, GM , Audi , Volkswagen ,series desktop computers rather than the curved
BMW,Mercedes Benz,Fit to: Nissan, Toyoto, Honda,contours now considered to be ergonomic. It featured
Mazda, ISUZU, Mitsubishi, Hyundai, Kia, Daewoo,three keypad areas: Alphabetic, numeric, and an array
Jeep,Ford, Chevrolet, Pontiac, Buick, GM, Audi,of cursor positioning and editing keys somewhat similar
Volkswagen, BMW, Mercedes Benz, Volvo, Chrysler,to modern PC keyboard layouts. There were also a
LADA, Eagle, and etc. universal joint,u joint,crossnumber of smaller function and feature control keys
axle,auto joint Send a message directly to this memberarrayed in two rows above the normal keypad areas.
Place of Origin: China ZhejiangThe keyboard chassis was separate from the main
The HP 2640A and other HP 264X models werebody, connected via a thick cable. The keyboard used
block-mode "smart" and intelligent ASCII standard seriala bit-paired layout (similar to that on a Teletype
terminals produced by Hewlett Packard using the Intelmachine) rather than the typewriter-paired
8008 and 8080 microprocessors.arrangement on DEC's VT100. Although large, users
Historyloved the keyboard because "it had a key for
The HP 2640A was introduced in 1975, and used aneverything".
Intel 8008 CPU, and was priced at US$3500. AtSimilar to the HP desktop computers, it had a number
introduction, it could have up to 8 KB of RAM (two 4of F-keys (F1 through F8) placed close to the screen.
KB semiconductor RAM cards). Also introduced inPaper templates were available for some application
1975 was the HP 2644A, which was an HP 2640Aprograms to which placed legends for these keys on
with mass storage (two mini-tape cartridges), forthe keyboard. Later models arranged these across the
US$5000.top row, and provided for screen labels close to their
Model Numberrespective keys. Terminal configuration in the 262X
The HP catalogs usually refer to the terminal model asseries was done entirely through the screen labeled
simply "2640A", and infrequently as "HP 2640", or "HPfunction keys rather than dedicated keys and through
2640A" (both with a blank after the "HP"), or "2640".escape sequences sent from the host computer. The
The incorrect "HP2640" and "HP2640A" are oftenon-screen labeling of the eight function keys, pioneered
seen outside of HP.by the HP 300 ("Amigo") computer, was one of the
Functionalityfirst applications of a hierarchical menu which allows
The functionality defined by the HP 264X series hasn'taccessing many functions with a small number of
changed much as the preferred terminal for HP1000keys. This arrangement is now common on TI graphic
and HP3000 series computers. They never achievedcalculators, and automated teller and gas pump
the notoriety of the VT100 among programmers, butmachines, though no longer used in GUI user interfaces.
included sophisticated features not found in the VT100,Internally, the electronics used a motherboard with
such as offline forms, multipages, and (in some models)plug-in daughter cards. The microprocessor, memory,
local storage.serial interface card, and various optional functions
The styling looked like vaguely like a toaster oven. Itwere each on separate cards. This permitted easy
was boxy, with a "widescreen" aspect ratio. HP hadfield maintenance, upgrades, and reconfiguration. For
determined that the combination of a standard 4:3example, more memory (providing larger scrollback
aspect ratio with the 25 line by 80 character displaycapability) could be easily added, the serial interface
that was the standard of the time required thecould be changed from RS-232 to current loop, etc.
characters to have a very high profile. HP's responseThe optional tape drives of the 2645 model were
was to specify a CRT with an aspect ratio designedinterfaced via another plug-in card. The plug-in card
around the desired character shape instead of thecapability strongly resembled the later Apple-II
other way around. Of course, this also mandatedexpansion architecture.
rather high manufacturing costs as standard partsThe manufacturing area was across from R&D
could not be used.cubicles in the Data Terminals Division in Cupertino. The
HP took pains to further improve the rendering oftesting area was dubbed "beepland" because it had
displayed characters via half-pixel positioning ofracks of 500 terminals, with the end of the test ending
individual lines within each character. Although thein a beep.
character cell was only 7 horizontal by 9 vertical dots,